This ESC module is designed for 1/87 to 1/43 micro rc model. The esc has no brake. Servo signal control the motor speed and servo signal control the front and rear led.
When servo signal 2 is low, both front led and rear led are off.
When servo signal 2 is middle, front led is low beam and rear led is on.
When servo signal 2 is high, front led is high beam and rear led is on.
Working voltage: 3.7C-5.5V
Input Signal Type: PWM
Driving frequency: 250Hz
The servo signal range: 1ms-2ms
Output Current: 3A
1 x 1S3A Micro Speed Controller PCB