DasMikro V3 Micro Brushless 18A PN ESC V3 For DIY
$29.99
This is a micro Sensor-less ESC designed for Brushless Motor. It could be used for 1/28 1/24 and 1/18 2WD or AWD micro RC car.
Out of stock
Description
DasMikro V3 Micro Brushless 18A PN ESC V3 For DIY
Description:
This is a micro Sensor-less ESC designed for Brushless Motor. It could be used for 1/28 1/24 and 1/18 2WD or AWD micro RC car.
Features:
- Specially designed for RC car and truck, with excellent starting up, acceleration and linearity features
- Compatible with sensor-less brushless motor
- 3running modes suitable for different applications
- Forward with brake mode / Forward-Backward with Brake mode / Forward-Backward no Brake Mode
- 4 steps of maximum reverse force adjustment
- Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag brake force adjustment and 4 steps of initial brake force adjustment
- 9 start modes from “Short” to “Smooth” to be suitable for different chassis, tires and tracks
- 7 multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection
- 8 steps of timing adjustment
- User programmable. Supported as: The “SET” button on the ESC, the digital LED Programmer
Specification:
Continues Current: 18A
Burst Current: 48A
Resistance: 0.01 ohm
Battery: 2S Li-Po/Li-Ion or 4-6 cells NiMH
BEC Output: 5V/3A
Size: 25mm x 20 mm x 7mm
Package Included:
1 x ESC
1 x 1.5mm 3P JST plug with high quality silicon cable
12 x 100mm high quality silicon cable (3 blue, 3 yellow, 5 black, 1 red)
4 x PH2.0 3P plug (for battery connection)
Wire Connection:
Pictures:
Additional information
Weight | 50 g |
---|---|
Dimensions | 25 × 20 × 1 cm |
Reviews
There are no reviews yet.